If the projected image seems to contain electronic
interference (noise) or static, try the following solutions:
- Check the
cables connecting your computer or video source to the projector.
They should be:
- Separated
from the power cord to prevent interference
- Securely
connected at both ends
- Not
connected to an extension cable
- If you adjusted the image shape, adjust the
Sharpness setting in the Image
menu.
- Check the
settings on the projector's Signal menu to make sure they match the
video source. If available for your video source,
adjust the Deinterlacing and
Noise Reduction
settings.
- If available for your video source, select
Auto as the Resolution setting in
the Signal menu.
- Select a
computer video resolution and refresh rate that are compatible with
the projector.
- Clean the projector lens.
- If you are projecting from a computer using a VGA
cable, press the Auto button on
the remote control to automatically adjust the tracking and sync.
If the problem remains, display a uniformly patterned image on the
screen and manually adjust the Tracking and Sync settings.
- Make sure the correct Video Range or EDID settings are selected in the Signal
menu.