Setting Up Network Scanning

You can set up network scanning to your product through a direct connection to your product.

First, manually configure your product to connect to your network. Then follow the instructions here to set up your computer for network scanning using the Epson Scan 2 Utility. Your product must be turned on and connected to the network.

Note: Make a note of the IP address or host name of the product so you can enter it in these steps.
  1. Do one of the following to start the Epson Scan 2 Utility:
    • Windows 11: Click , then search for Epson Scan 2 Utility and select it.
    • Windows 10: Click > EPSON > Epson Scan 2 Utility.
    • Windows 8.x: Navigate to the Apps screen and select Epson Scan 2 Utility.
    • Windows 7: Click > All Programs > EPSON > Epson Scan 2 > Epson Scan 2 Utility.
    • Mac: Open the Applications folder, click Epson Software, and click Epson Scan 2 Utility.
  2. Select Settings from the Scanner drop-down list. You see a screen like this:


    Note: If you see an Enable Editing button (Windows) or the lock icon (Mac), click it so that you can modify the product settings.
  3. Select your product and click Add. You see a screen like this:


  4. Do one of the following:
    • Under Search for Network, select the IP address of your Epson product and click Add.
    • Select the Enter address setting, type in the IP address or host name of your Epson product, and click Add.
  5. Click OK to check the connection. You see a confirmation message.
  6. Click OK to save your settings and close the Epson Scan 2 Utility.
Parent topic: Wi-Fi or Wired Networking
Related tasks
Selecting Wireless Network Settings from the Control Panel