Scanning to a Connected Computer

You can scan an original from the control panel using jobs created in Document Capture Pro (Windows) or Document Capture (Mac). Set the operation mode on the control panel before scanning.

Make sure you installed the product software and connected the product to your computer or network.
Note: Restart your computer after installing the product software to enable scanning from the control panel.
Place your original on the product for scanning.
Select the home icon, if necessary.
Select Computer.
Select the computer on which you created the jobs in Document Capture Pro or Document Capture.
Note: If the product is connected via USB or the operation mode is set to Server Mode, you do not need to select a computer.
On the Select Job screen, select the job you want to use.
Note: If you have only created one job, you do not need to select the job.
If you want to change the scan settings, tap the icon and select from the following options:
- To slow down the scanning speed, set the Slow setting to On.
- To stop scanning when a double feed is detected, select Double Feed Stop Timing and select a timing option.
- To skip double feed detection when scanning originals such as envelopes or plastic cards, set the DFDS Function setting to On.
- To stop scanning when an original containing staples is detected, select Paper Protection and select the setting you want to use.
  Note: Turning this function on will not always prevent damage to your originals.
- To detect dirt on the glass surface inside the product, select Glass Dirt Detection and select the setting you want to use.
Select the icon to view the job settings.
Select the start icon to start scanning. Document Capture Pro opens and your product scans the original and sends the scanned file to the connected computer.