| Setting | Options | Description |
|---|---|---|
| JPEG | Display order | Select the display order |
| Basic Settings | See the Basic Settings table below | |
| Advanced | See the Advanced table below | |
| PDF
(available only on models with Adobe Embedded Print Engine) |
— |
Displayed when the Adobe Embedded Print Engine is enabled |
| Epson Scanned PDF
(SureColor T5770DM/T7770DM only) |
Display order | Select the display order |
| Basic Settings | See the Basic Settings table below | |
| Advanced | See the Advanced table below | |
| TIFF | Display order | Select the display order |
| Basic Settings | See the Basic Settings table below | |
| Advanced | See the Advanced table below | |
| HP-GL/2 | Display order | Select the display order |
| Basic Settings | See the Basic Settings table below | |
| Advanced | See the Advanced table below |
Basic Settings
| Setting | Options | Description |
|---|---|---|
| Paper Source | Roll(Auto)
Roll 1 Roll 2 Cut Sheet Poster Board |
Select the paper source |
| Color Mode | Black/White
Color |
Select the color mode to use when printing |
Advanced
| Setting | Options | Description |
|---|---|---|
| Print Quality | Draft
Speed Fine High Quality Max Quality |
Specify the print quality |
| Page Margins option | Clip By Margins | Adds the value selected for the page margin inside the size selected for the base output size |
| Oversize | Adds the value selected for the page margin outside the size selected for the base output size (when set to a standard size) | |
| Borderless | Enlarges the print size slightly to print a borderless image on roll paper | |
| Bidirectional | On
Off |
Select On to print in both directions, resulting in faster print speed but reduced accuracy |
| Select Target | Poster(Photo)/
Perspective
(SureColor P-Series models only) |
Prints posters and perspective drawings that use photos with natural colors |
| Poster/Document
(SureColor T-Series models only) |
Prints posters with both text and illustrations with vivid colors | |
| GIS | Performs color correction when printing topographical maps | |
| CAD/Line Drawing | Performs color correction when printing CAD drawings and other line drawings | |
| Off (No Color Management) | Turns off color management in the printer | |
| CMYK Simulation
(available only on models with Adobe Embedded Print Engine) |
— | Displayed when Adobe Embedded Print Engine is enabled; select the CMYK ink color you want to simulate when reproducing CMYK ink colors for an offset printer |
| RGB Source
(available only on models with Adobe Embedded Print Engine) |
— | Displayed when Adobe Embedded Print Engine is enabled; select the RGB color definition you want to simulate when printing RGB data |
| Rendering
Intent
(available only on models with Adobe Embedded Print Engine) |
— | Displayed when Adobe Embedded Print Engine is enabled; select how to convert the color space when performing absolute colorimetric, relative colorimetric, perceptual, saturation CMYK simulation, and RGB simulation |
| Target Contents
(available only on models with Adobe Embedded Print Engine) |
— | Displayed when Adobe Embedded Print Engine is enabled; specify target contents as Standard, GIS, or Line Drawing |
| Reduce/Enlarge | Auto Fit Page | Displayed when Adobe
Embedded Print Engine is enabled
Select Auto Fit Page > On to fit the short edge of the image to the width of the paper Note: This setting
is not available if paper is not loaded into the printer.
Select Actual Size to print using the image size or select a different output size |
| Custom Size | ||
| Actual Size | ||
| Specified Size | ||
| Base Output Size | — | Select a base output size |
| File Storing
(available only when the SSD unit is connected) |
— | Set the storage space in which to save data printed from a memory device |