You
can temporarily turn off the projected picture and sound using a
mechanical shutter if you want to redirect your audience's
attention during a presentation. Any sound or video action
continues to run, however, so you cannot resume projection at the
point that you stopped it (EB-PU2213B/EB-PU2216B/EB-PU2220B).
Note: If the
picture and sound are off for more than 2 hours, the power
automatically turns off. You can disable the Shutter Timer setting in the Extended Menu to
turn off this feature.
- Press the A/V Mute button on the remote control to temporarily stop projection and mute any sound.
- To turn the picture and sound back on, press the A/V Mute button again.
Note: To fade
the image in and out when you use Shutter, turn on the Fade-out and/or Fade-in settings in the Extended menu.
Note: If you
selected Shutter as the
Shutter Release setting in the
Extended menu, you can still control the projector while Shutter is
enabled.
Note: Enable
the Startup and Standby settings if you want to activate the
shutter when the projector turns on or off. Select Last Used for the Standby setting if you want
to maintain the current shutter status when you turn off the
projector.