Configuring a Product IP Address Using EpsonNet Config

You can configure the product's IP address using EpsonNet Config.
  1. Turn on the product.
  2. Connect the product to a network using an Ethernet cable.
  3. Do one of the following to start EpsonNet Config:
    • Windows 11: Click , then search for EpsonNet Config and select it.
    • Windows 10: Click > All Apps > EpsonNet > EpsonNet Config.
    • Windows 8.x: Navigate to the Apps screen and select EpsonNet > EpsonNet Config.
    • Windows (other versions): Click or Start and select All Programs or Programs. Select EpsonNet > EpsonNet Config.
    • Mac: Open the Applications folder, open the Epson Software folder, and select EpsonNet > EpsonNet Config > EpsonNet Config.
    After a few moments, the program displays the connected products.
  4. Double-click the product you are configuring.
    Note: If several products of the same model are connected, you can identify them by their MAC address.
  5. Enter the current administrator password if necessary, and click OK.
  6. From the menu on the left, under TCP/IP, select Basic. You see a window like this:


  7. Select Manual.
  8. Enter the product's IP address, Subnet Mask, and Default Gateway settings in the fields provided.
    Note: To connect the product to a secure network, enter a static IP address. You can also configure the DNS settings by selecting DNS, and enter proxy settings by selecting Internet from the TCP/IP menu.
  9. Select Transmit.
Parent topic: Using EpsonNet Config Network Configuration Software