Setting | Options | Description |
---|---|---|
Connection Mode | Quick
Advanced |
Selects the type of wireless connection:
Quick: lets you connect to multiple smartphones, tablets, or computers directly Advanced: lets you connect to multiple smartphones, tablets, or computers via a wireless network access point |
Search Access Point | To Search View | Search for available wireless network access points in Advanced connection mode |
SSID | Up 32 alphanumeric characters | Sets the SSID (network name) of the wireless LAN system the projector is connecting to |
Security | Open
WPA2-PSK WPA3-PSK WPA2/WPA3-PSK |
Selects the type of wireless security used in the wireless network (some options are only available when the Connection Mode setting is set to Advanced) |
Passphrase | Between 8 to 63 alphanumeric characters | Enter a paraphrase for the wireless network (passphrases longer than 32 characters must be entered using Web Config) |
Channel | Various channels available | In Quick connection mode, selects the frequency band (channel) used by the wireless LAN |
IP Settings | DHCP
IP Address Subnet Mask Gateway Address |
Turns on DHCP if your network assigns addresses automatically; set to Off to manually enter the network's IP Address, Subnet Mask, and Gateway Address (some options are only available when the Connection Mode setting is set to Advanced) See the note after the table for restricted addresses. |
SSID Display | On
Off |
Selects whether to display the SSID on the network standby screen |
IP Address Display | On
Off |
Selects whether to display the IP address on the network standby screen |
IPv6 Settings | IPv6
Auto Configuration Use Temporary Address |
Selects the IPv6 settings when you connect the
projector to the network using IPv6
The Epson Web Control and PJLink functions support IPv6. |