Setting Up Projector Network E-Mail Alerts

You can set up the projector to send you an e-mail alert over the network if there is a problem with the projector.

Note: If the Standby Mode setting is set to Communication On, you can receive e-mail alerts even if the projector is in standby mode (the power is off). You must be connected to a network with the Wireless LAN > Connection Mode setting set to Advanced.

Press the Menu button.
Select the Network menu and press Enter.
Select Network Configuration and press Enter.
Select the Notifications menu and press Enter.
Turn on Mail Notification.
Enter the IP address for the SMTP Server setting.
Note: Do not use these addresses: 127.x.x.x or 224.0.0.0 through 255.255.255.255 (where x is a number from 0 to 255).
Select a number for the SMTP server Port Number setting, from 1 to 65535 (default is 25).
Enter the sender's email address as the From setting.
Choose an Address Setting field, enter the e-mail address, and select or deselect the alerts you want to receive there. Your e-mail address can be up to 32 alphanumeric characters long. Repeat for up to three addresses.
Note: You can enter up to 63 characters for the email address if you use Web Config.
When you finish selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus.

Note: If a critical problem causes a projector to shut down, you may not receive an e-mail alert.