You can save
the projector settings you want to transfer to a USB flash drive.
Note: Use an
empty flash drive. If the drive contains other files, the transfer
may not complete correctly. The flash drive must use the FAT format
and cannot have any security features.
- Turn off the projector and unplug the
power cord from the projector's power inlet.
- Insert the flash drive into the USB-A port.
Note: Connect the flash drive directly to the projector. Do not use a hub or your settings may not be saved correctly.
- Press and hold the
return button on the remote control
as you connect the power cord to the
projector. - When the status light turns on, release
the return button.
The light flashes to indicate that settings are transferring to the flash drive. When the light stops flashing, it turns blue and the projector enters standby mode.Caution:Do not unplug the power cord or remove the flash drive while the light is flashing.This could damage the projector.Note: If the status light flashes orange, the batch setup file may be corrupt or the cable is not connected correctly. Disconnect the USB cable, then unplug the projector and try the procedure again. If the problem continues, unplug the projector and contact Epson for help. - Once the projector enters standby mode, remove the flash drive.