Turn on the projector
before you turn on the video source you want to use.
Caution:
Do not turn on the video source before
connecting it to the projector; otherwise, you may damage the
projector.
- Connect the power cord to the projector's power inlet and plug it in to an electrical outlet.
- Press the
power button on the
projector or the remote control to turn on the projector.
The status indicator flashes blue as the projector warms up. After
the projector is warmed up, the status light stops flashing and
turns blue.
Warning: Never look into the projector lens when the light is on. The light can damage your eyes and is especially dangerous for children and pets.Caution:Make sure no objects are blocking the light from the projector lens. Objects blocking the lens for an extended time can melt and light that is reflected back into the lens can cause the projector to malfunction.
When the Direct Power On setting is enabled in the Settings menu, the projector turns on as soon as you plug it in. The projector also turns on automatically when power is restored after a power outage.
If you select a specific port as the Auto Power On setting in the Settings menu, the projector turns on as soon as it detects a signal or cable connection from that port.
The first time you turn on the projector, the remote control pairing screen and initial setup screen are displayed. Follow the on-screen instructions to complete the initial setup.