Correcting Image Shape with Quick Corner

You can use the projector's Quick Corner setting to correct the shape and size of an image that is unevenly rectangular on all sides.

Turn on the projector and display an image.
Press the menu button.
Select the Settings > Installation menu and press Enter.
Select the Keystone setting and press Enter.
Select the Quick Corner setting and press Enter.
Note: You may see a confirmation screen. Select Yes and press Enter again.

Note: You can also press the keystone button on the remote control to display the Keystone adjustment screen.
You see the Quick Corner adjustment screen:
Use the arrow buttons on the remote control to select the corner of the image you want to adjust. Then press Enter.
Note: To reset your adjustments, press and hold the return button for at least 2 seconds to display a reset screen. Then select Yes.
Press the arrow buttons to adjust the image shape as necessary. Press Enter to return to the area selection screen.
Note: If one of the directional arrows on the screen turns gray, you cannot adjust the shape any further in that direction.
When you are finished, press the return button.