|
Device Name
|
Displays the Device Name. You can enter a new name to change the
name of the device. |
|
Location
|
Displays a user-entered location for the printer |
|
Obtain IP Address
|
Sets
the IP Address; if set to Manual,
enter the information in the appropriate fields |
|
Set using BOOTP
|
Enables IP addressing using BOOTP |
|
Set using Automatic Private IP
Addressing (APIPA)
|
Enables IP addressing using APIPA |
|
IP Address
|
Displays the IP address. If you are manually entering the IP
address, enter it in the format xxx.xxx.xxx.xxx (where xxx is a
number between 0 and 255). Make sure the address is unique and does
not conflict with any other device on your network. |
|
Subnet Mask
|
Displays the subnet mask. If you are manually entering the subnet
mask, enter it in the format xxx.xxx.xxx.xxx (where xxx is a number
between 0 and 255). |
|
Default Gateway
|
Displays the default gateway address. If you are manually setting
the default gateway, enter it in the format xxx.xxx.xxx.xxx (where
xxx is a number between 0 and 255). |
|
DNS Server Setting
|
Selects the DNS server setting. If the Obtain IP Address setting is set to
Manual, this setting is also set
to Manual. |
|
Primary DNS Server
|
Enter the address of the primary DNS server in the format
xxx.xxx.xxx.xxx (where xxx is a number between 0 and 255). |
|
Secondary DNS Server
|
Enter the address of the secondary DNS server in the format
xxx.xxx.xxx.xxx (where xxx is a number between 0 and 255). |
|
DNS Host Name Setting
|
Sets
the DNS Host Name selection method. |
|
DNS Host Name
|
Displays the current DNS Host Name. |
|
DNS Domain Name Setting
|
Sets
the DNS Domain Name selection method |
|
DNS Domain Name
|
Specifies the DNS domain name. The name must conform to the
following format:
- Enter between 2 and 249 characters using only the
characters "A-Z", "a-z", "0-9", hyphen "-", and a period "."
- The first character cannot be a "0-9", hyphen "-",
or a period "."
- The last character cannot be a hyphen "-" or a
period "."
- Each label in the domain name must be between 1 and
63 characters and separated by a period.
- The total number of characters in the host and
domain name must not exceed 251.
|
|
Register the network interface address
to DNS
|
Allows you to register the host and domain names through a DHCP
server that supports Dynamic DNS |
|
Proxy Server Setting
|
Enables the use of a proxy server |
|
Proxy Server
|
Specifies the name of the proxy server in either IPv4 or FQDN
format |
|
Proxy Server Port Number
|
Specifies the port number for the proxy server (between 1 and
65535) |
|
Proxy Server User Name
|
Specifies the user name for the proxy server (0-255 ASCII
characters [0x20-0x7E]) |
|
Proxy Server Password
|
Specifies the password for the proxy server (0-255 ASCII characters
[0x20-0x7E]) |
|
IPv6 Setting
|
Enables the use of IPv6 addressing |
|
IPv6 Privacy Extension
|
Enables the use of private IPv6 addresses |
|
IPv6 DHCP Server Setting
|
Enables the use of a IPv6 DHCP server |
|
IPv6 Address
|
Specifies the IPv6 address. The address must conform to the
following format:
- xxxx: xxxx: xxxx: xxxx: xxxx: xxxx: xxxx: xxxx /
prefix
- xxxx is a hexadecimal number from 1 to 4 digits, and
the prefix is a decimal number from 1 to 128.
- If there are consecutive blocks where xxxx is all
zeros, it can be omitted as ::. (Only one block can be
omitted.)
|
|
IPv6 Address Default Gateway
|
Specifies the IPv6 address of the default gateway. The address must
conform to the following format:
- xxxx: xxxx: xxxx: xxxx: xxxx: xxxx: xxxx: xxxx
- xxxx is a hexadecimal number from 1 to 4 digits
- If there are consecutive blocks where xxxx is all
zeros, it can be omitted as ::. (Only one block can be
omitted.)
|
|
IPv6 Link-Local Address
|
Displays the valid IPv6 Link-Local Address |
|
IPv6 Stateful Address
|
Displays the valid IPv6 Stateful Address |
|
IPv6 Stateless Address 1
|
Displays the valid IPv6 Stateless Address 1 |
|
IPv6 Stateless Address 2
|
Displays the valid IPv6 Stateless Address 2 |
|
IPv6 Stateless Address 3
|
Displays the valid IPv6 Stateless Address 3 |
|
IPv6 Primary DNS Server
|
Specifies the address for the IPv6 primary DNS server. The address
must conform to the following format:
- xxxx: xxxx: xxxx: xxxx: xxxx: xxxx: xxxx: xxxx
- xxxx is a hexadecimal number from 1 to 4 digits
- If there are consecutive blocks where xxxx is all
zeros, it can be omitted as ::. (Only one block can be
omitted)
|
|
IPv6 Secondary DNS Server
|
Specifies the address for the IPv6 secondary DNS server. The
address must conform to the following format:
- xxxx: xxxx: xxxx: xxxx: xxxx: xxxx: xxxx: xxxx
- xxxx is a hexadecimal number from 1 to 4 digits
- If there are consecutive blocks where xxxx is all
zeros, it can be omitted as ::. (Only one block can be
omitted.)
|
|
IEEE802.11k/v
|
Enables the use of IEEE802.11k/v network environments |
|
IEEE802.11r
|
Enables the use of IEEE802.11r network environments |