Ink Pack Safety Instructions
- Keep ink
packs out of the reach of children and do not drink the ink.
- Be careful
when you handle used ink packs; there may be ink remaining around
the ink supply port. If ink gets on your skin, wash it off with
soap and water. If it gets in your eyes, flush them immediately
with water. If discomfort or vision problems
continue after a thorough flushing, see a doctor immediately. If
ink gets in your mouth, see a doctor right away.
- Install a
new ink pack immediately after removing an expended one. Leaving
ink packs uninstalled can dry out the print head and may prevent
the product from printing.
- Install all ink packs; otherwise you cannot
print.
- If you need to remove an ink pack temporarily, make
sure you protect the ink pack from dirt and dust. Store the ink
pack in the same environment as the printer. Because the ink supply
port is equipped with a valve designed to contain the release of
excess ink, there is no need to supply your own covers or
plugs.
- Do not
remove or tear the label on the ink pack; this can cause
leakage.
- Do not
remove the transparent seal from the ink supply area. This may
cause the ink pack to become unusable.
- Do not touch
the green IC chip on the side of the handle. This may prevent
normal operation.
- Do not shake
ink packs too vigorously; otherwise ink may leak.
- Do not drop or knock the ink pack against hard
objects; otherwise ink may leak.
- Use an ink
pack before the date printed on its package.
- Do not disassemble an ink pack or a maintenance box.
Ink may get in your eyes or on your skin.
- Store ink
packs in a cool, dark place.
- Do not store ink packs in high or freezing
temperatures.
- After
bringing an ink pack inside from a cold storage site, allow it to
warm up at room temperature for at least 12 hours before using
it.
- Store ink
packs with the bottom facing down.
- To help protect your print head, a variable ink
safety reserve remains in the ink supply unit when your printer
notifies you to replace the ink pack. The yields quoted for you do
not include this reserve.
- You cannot use the ink packs supplied with the
product as replacement ink packs. They must be used for initial
setup.
Was this page helpful?
Yes or
No.