You can
install up to three optional paper cassette units to provide more
paper capacity.
Turn off the product, and
unplug the power cord and any connected cables.
Warning: To
avoid electric shock, make sure you unplug the power cord.
Remove the paper cassette
unit from its packaging and remove any protective materials.
Make sure you have all the
items shown here. You will also need a screwdriver to attach the
paper cassette unit, and two people to lift the printer.
Remove the protective
piece from the back of the printer.
Note: Do not
throw the piece away; you will use it later.
Place the first optional
paper cassette unit in the location where you want to set up the
printer.
If you are installing more
than one optional paper cassette unit, stack them on top of each
other and secure them with the included screws.
Repeat this step for all
paper cassette units.
Lift up your product and
gently lower it onto the paper cassette unit with the corners
aligned. Secure the product to the paper cassette unit using the
included screws.
Caution:
Because the product is heavy, two or more
people should lift and carry it using the hand positions shown:
Secure the printer and
paper cassette units at the back and right side using the included
screws as shown.
Re-insert the part you
removed earlier into the back of the lowest paper cassette
unit.
Place the correct sticker
on each cassette unit to indicate the cassette number.
Connect the power cord and
other connection cables, then plug in the product.
Turn on the
product.
Press the Paper
Setting button and make sure the installed cassette
units are displayed on the screen.
Enable the optional paper
cassette units in the printer software.