Changing the Projected Image Using Flexible Picture

You can use the Flexible Picture features to change the projected image without moving the projector.
  1. Turn on the projector and display an image.
  2. Press the  Flexible Picture menu button on the remote control.
    Note: This button is not available when the Installation menu is displayed.
  3. You can adjust the following settings:
    • Use the Brightness buttons on the remote control to adjust the image size. You can reduce the image size to about 30%.


    • If you made the image smaller, use the directional pad on the remote control to change the position of the image.


    • Press the  Flexible Picture menu button on the remote control to flip the image horizontally. Press the button again to flip the image back.


    • Press the  blank button on the remote control to blur the edges of the image so that it blends into the wall you're projecting onto.


    Note: Press the  settings button to reset all of the Flexible Picture settings.
  4. Press the  esc button to exit the menu.
Parent topic: Adjusting Projector Features
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use