You can set up or install your projector in the
following ways:
Front
Rear
Front ceiling
Rear ceiling
Wherever you set up the projector, make sure to
position it squarely in front of the screen, not at an
angle, if possible. If the projector is installed
at an angle, it should be installed by qualified technicians using
mounting hardware designed for use with this projector.
If you project from the ceiling or wall, or from the
rear, be sure to select the correct Projection option in the projector's menu
system.
Note: Install
the projector appropriately to prevent it from falling down. Use M4
screws (up to a depth of 0.35 inches [9 mm]) to fix the projector's
ceiling mount fixing points and the mounting hardware at the four
points.
Installation space
Be sure to leave the following amount of space
around the projector so as to not block the air exhaust or intake
vents.
| 1 |
0.9 inches (2.3
cm) |
| 2 |
7.9 inches (20 cm) |
| 3 |
3.9 inches (10 cm) |
When installing multiple projectors
side-by-side
Without partition
If you are installing multiple projectors next to
each other, make sure hot air from the exhaust vent does not go
into the air intake vent of the other projector.
With partition
If you use a partition, you can narrow the space
between the projectors.
| 1 |
Partition |
| 2 |
7.9 inches (20 cm) |
