The
remote control's ID is set to zero by default so it can operate any
compatible projector. If you want to set the remote control to
operate only a particular projector, you need to set the remote
control's ID to match the projector's ID.
- Turn on the projector you want the remote control to operate with exclusively.
- Aim the remote control at that projector and press the ID button on the remote control. The current projector ID is displayed on the screen for about 3 seconds.
-
Hold down the ID button on the remote control while you
press the numeric button that matches the projector's ID. Then
release the buttons.
Note: If you select 0/All on the remote control, you can operate all projectors regardless of the Projector ID setting.
The remote control's ID is
set.
Note: If the
batteries are left out of the remote control for an extended
period, the remote control ID returns to its default setting.
If you use multiple remote controls at the same
time, you may not be able to operate the projectors as intended due
to infrared interference.