| Setting | Options | Description |
|---|---|---|
| Connection Mode | Quick
Advanced |
Selects the type of wireless connection:
Quick: lets you connect to multiple smartphones, tablets, or computers directly Advanced: lets you connect to multiple smartphones, tablets, or computers via a wireless network access point |
| Search Access Point | To Search View | Search for available wireless network access points in Advanced connection mode |
| SSID | Up 32 alphanumeric characters | Sets the SSID (network name) of the wireless LAN system the projector is connecting to |
| Security | Open
WPA2-PSK WPA3-PSK WPA2/WPA3-PSK WPA3-EAP WPA2/WPA3-EAP |
Selects the type of wireless security used in the wireless network (some options are only available when the Connection Mode setting is set to Advanced) |
| Passphrase | Between 8 to 63 alphanumeric characters | Enter a passphrase for the wireless network |
| EAP Method | EAP Type
User name Password Client Certificate Verify Server Cert. CA certificate RADIUS Serv.Name |
Sets the EAP settings for WPA3-EAP and WPA2/WPA3-EAP security |
| Channel | 1ch
6ch 11ch |
In Quick connection mode, selects the frequency band (channel) used by the wireless LAN |
| IP Settings | DHCP
IP Address Subnet Mask Gateway Address DNS Server 1 DNS Server 2 |
Turns on DHCP if your network assigns addresses
automatically; set to Off to
manually enter the network's IP
Address, Subnet Mask, and
Gateway Address (some options are
only available when the Connection
Mode setting is set to Advanced)
DNS Server 1/DNS Server 2: enter the IP address for the DNS server |
| SSID Display | On
Off |
Selects whether to display the SSID on the network standby screen |
| IP Address Display | On
Off |
Selects whether to display the IP address on the network standby screen |
| IPv6 Settings | IPv6
Auto Configuration Use Temporary Address |
Selects the IPv6 settings when you connect the
projector to the network using IPv6
The Epson Web Control and PJLink functions support IPv6. |