To
use the projector over a wireless network, install the optional
Epson wireless LAN module. Do not install any other type of
wireless LAN module.
Caution:
Never remove the module while its
indicator light is blue or flashing, or while you are projecting
wirelessly. You may damage the module or lose data.
Note: The
indicator on the wireless LAN module does not operate. See the
wireless LAN indicator on the projector to check the wireless LAN
status.
- Turn off the projector and unplug the power cord.
- Use a Phillips-head screwdriver to remove the screw securing the wireless LAN module cover, then remove the cover.
- Insert the wireless LAN module into the USB-A port.
- Replace the wireless LAN module cover and secure it using the screw you removed.
- Plug in and turn on the projector.
