You can set
up the projector to send you an e-mail alert over the network if
there is a problem with the projector.
Note: If the
Standby Mode setting is set to
Communication On in the Extended
menu, you can receive e-mail alerts even if the projector is in
standby mode (the power is off). The projector must be connected to
a wired LAN or a wireless LAN with the Connection Mode setting set to Advanced.
- Press the Menu button.
- Select the Network menu and press Enter.
- Select Network Configuration and press Enter.
- Select the Notifications menu and press Enter.
- Turn on Mail Notification.
- Enter the IP address for the SMTP Server setting.
Note: Do not use these addresses: 127.x.x.x or 224.0.0.0 through 255.255.255.255 (where x is a number from 0 to 255).
- Select a number for the SMTP server Port Number setting, from 1 to 65535 (default is 25).
- Enter the sender's email address as the From setting.
- Choose an Address Setting field, enter the e-mail address, and select or deselect the alerts you want to receive there. Your e-mail address can be up to 32 alphanumeric characters long. Repeat for up to three addresses.
- If you are using the PJLink protocol for projector control, turn on the PJLink Notification setting and enter the IP address where you want to receive PJLink notifications as the Notified IP Address setting.
- When you finish selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus.
