If you do not receive an e-mail alerting you to
problems with a projector over the network, try the following
solutions:
- Make sure
the projector is turned on and connected to the network correctly.
(If an error shut down the projector, it cannot send an
e-mail.)
- Make sure
you set up the projector e-mail alert settings correctly on the
projector's Network Notifications menu or
in the network software.
- Set the
Standby Mode setting to
Communication On so the network
software can monitor the projector in standby mode. Connect to a wired LAN, or to a wireless LAN with the
Connection Mode setting set to
Advanced.Change the Port setting
according to your network environment.