If you are unable to access the projector through a
web browser, make sure you are using the correct ID and password,
which are case sensitive.
- For the user
ID, enter EPSONWEB. (You cannot
change the user ID.)
- For the password, enter the password set in the
projector's Network menu. The default password is the projector's
serial number.
- Make sure
you have access to the network the projector is on.
- If your Web browser is set up to connect via a proxy
server, the Epson Web Control
screen cannot be displayed. Make settings for a connection without
using a proxy server.
- If you set Standby
Mode to Communication On
in the projector's Extended menu, make sure the network device is
turned on. After turning on the network device, turn on the
projector.
- Connect to a wired LAN, or to a wireless LAN with
the Connection Mode setting set
to Advanced.
Note: The
user ID and password are case sensitive.