After you select menu settings for your projector, you
can transfer them to another projector of the same model.
Note:
Copy the projector's settings before you adjust
the projected image using the projector's Geometry
Correction settings.
Caution:
If the copy process fails due to a power
failure, communication error, or for any other reason, Epson will
not be responsible for any repair costs incurred.
The following settings will not transfer between
projectors:
- Light Source Hours
- Status
The following settings will not transfer between
projectors if you set the
Batch Setup
Range setting to
Limited:
- Password Protection settings
- EDID in the Signal
I/O menu
- Network menu settings