If you are unable to access the projector through a
web browser, make sure you are using the correct ID and password,
which are case sensitive.
Note: You
cannot change the user ID.
- For the user ID, enter EPSONWEB. (You cannot change the user ID.)
For the password, enter the password set in the projector's
Network menu. No password is set
by default.
- Avoid connecting via a proxy server.
- Make sure you have access to the network the
projector is on.
- Check the IP address on the projector, then reenter
the IP address in the browser search bar.
- If you set the Standby
Mode setting to Communication
On in the projector's Operation menu, make sure the network
device is turned on. After turning on the network device, turn on
the projector.
Note: The
user ID and password are case sensitive.