You can
control certain document camera features from the projected toolbar
when a compatible Epson document camera is connected.
Note: A
document camera toolbar is displayed only when an Epson DC-07,
DC-13, or DC-21 document camera is connected. You must connect the
Epson DC-13 and DC-21 cameras via HDMI and the Epson DC-07 camera
via USB to control them from the projector toolbar.
Connect an Epson document camera to the projector.
Note: If you
are connecting the document camera via HDMI cable, make sure
HDMI Link is set to On in the Signal I/O menu and disable
PC Interactivity on the
interactive toolbar.
You see a toolbar like this at the bottom of the projected image.
You can select the following options as available. Depending on
your document camera model, options may vary.
1
Automatically focuses
the image
2
Pauses the image
3
Enlarges the image
4
Rotates the image 180°
5
Captures the image and
drawings
6
Records the image
7
Switches sources to the SD Card
Viewer
To move the toolbar, use the pen or your finger to drag it
to the desired location.
To minimize or expand the toolbar, select the icon.