Auto Source Search
|
On
Off
|
Enables the projector to automatically select an input
source |
Light Source Brightness
Control
|
Maintain Brightness
(EB-770Fi)
Maintain Brightness
Level (EB-770Fi)
Light Source Mode
Brightness Level
|
Controls the constant brightness of the projector's
light source
Maintain Brightness:
maintains a constant brightness
Maintain Brightness
Level: selects the brightness level to maintain when the
Maintain Brightness setting is
enabled
Light Source Mode:
selects the brightness mode of the projector when the Maintain Brightness setting is
disabled
- Normal: maximum
brightness
- Quiet: 70%
brightness with reduced fan noise
- Extended: 70%
brightness and extends the life expectancy of the light source
- Custom: select a
custom brightness level and enable use of the next setting
Brightness Level:
select the Custom brightness
level you want when the Maintain
Brightness setting is disabled |
Direct Power On
|
On
Off
|
Controls whether the projector automatically turns on
when you plug it in |
Auto Power On
|
HDMI1
Computer1
USB Display
Off
|
Selects whether to automatically turn on the projector
when you connect an input signal to a specific input
source; USB
Display is only available when USB Display is enabled; adjust the
Power On Trigger setting to
change the power on settings for the HDMI1 option |
Power On Trigger
|
Plug-in Detection
Signal Detection
|
Selects the power on condition when Auto Power On is set to HDMI1:
- Plug-in Detection:
automatically turns on the projector when the device connected to
the HDMI1 port is turned on
- Signal Detection:
automatically turns on the projector when it detects an HDMI video
signal on the HDMI1 port;
selecting this option increases standby power consumption
|
Sleep Mode
|
On
Off
|
Automatically turns off the projector after an interval
of inactivity |
Sleep Mode Timer
|
1 to 30 minutes |
Sets the time before the projector automatically turns
off (Sleep Mode must be turned
on) |
A/V Mute Timer
|
On
Off
|
Automatically turns off the projector after 30 minutes
if A/V Mute is enabled |
Standby Mode
|
Communication On
Communication Off
|
Enable this setting to allow monitoring and control of
the projector over a network when the projector is in standby mode;
this setting is only displayed in the following cases:
- Auto Power On is
disabled in the projector's Network menu
- Auto Power On is
not set to HDMI1 and Power On Trigger is set to Plug-in Detection
- A/V Output is set
to While Projecting in the Signal
I/O menu
- USB Power is set
to On While Projecting
|
Port
|
Wired LAN
Wireless LAN
|
Selects the port to use while the Standby Mode setting is set to Communication On |
Quick Startup
|
Off
20min.
60min.
90min.
|
Sets the time period for which you want to be able to
start projecting within five seconds of pressing the power button
(Quick Start mode)
It may take longer than five seconds when projecting
from the projector's USB port, when whiteboard
sharing was terminated in the previous session, when you want to
restore the whiteboard contents from the previous session,
or when using the Screen Mirroring features. This
setting is only displayed when A/V
Output is set to While
Projecting in the projector's Signal I/O menu, Auto Power On is set to HDMI1 and Power On
Trigger is set to Plug-in
Detection in the projector's Operation menu, and when
Auto Power On is set to
Off in the projector's Network
menu. |
USB Power
|
On While Projecting
Always On
|
Sets whether the USB-A port continuously supplies power
or only when the projector is on. This setting is only displayed
when Auto Power On is set to
HDMI1 and Power On Trigger is set to Plug-in Detection, A/V Output is set to While Projecting in the projector's Signal
I/O menu, or Auto Power On is
disabled in the projector's Network menu.
Note: When
Always On is selected, the
projector's power consumption increases in standby mode. |
Closed Caption
|
CC1
CC2
Off
|
Selects the type of closed captioning to display
(availability varies by country) |
Inv Direction Button
|
On
Off
|
Enable this setting if you want to invert the direction
of the arrow buttons on the control panel to match the projector's
installation position |
Reset Operation
Settings
|
— |
Reset all settings on the Operation menu to their
default values |