If the "No Signal" message appears, try the
following solutions:
- Press the
Source Search button and wait a
few seconds for an image to appear.
- Turn on
the connected computer or video source, and press its play button
to begin your presentation, if necessary.
- Check the
connection from the projector to your video sources.
- If you are
projecting from a laptop computer, make sure it is set up to
display on an external monitor.
- If
necessary, turn the projector and the connected computer or video
source off and then on again.
- If you are projecting from an HDMI source, replace
the HDMI cable with a shorter one.
- Connect the video source directly to the
projector.
- Try a different video cable.
- If the other solutions do not solve the problem,
reset all of the projector settings using the options on the
Initial/All Settings menu.