Settings on the Network menu let you view network information and set up the projector for control over a network.
Note: You
must disable Network password protection to adjust the network
settings.
| Setting | Options | Description |
|---|---|---|
| Wireless LAN Info. | — | Displays wireless network status and details |
| Wired LAN Info. | — | Displays wired network status and details |
| Art-Net Channel Information | — | Displays features and settings assigned to the Art-Net channels |
| Network Settings | — | Configures your network settings
Note: If the
Remote Password and the Web Control Password have not been set, a
screen appears prompting you to set them. Enter passwords up to 32
characters long. These passwords are used for accessing the
projector over a network, and you do not need to enter them to
access the Network Settings menu after you set them. |
| Transmitter Settings | Start Pairing
Auto Power On Connection Guide Display |
Start Pairing:
Updates the network information of the wireless transmitter from
your computer using the Epson Wireless Transmitter Settings
software when the wireless LAN module is installed and Simple AP is set to On
Auto Power On: Set to On to turn on the projector automatically. This setting is only displayed when A/V Output is set to While Projecting in the projector's Signal I/O menu, Power On Trigger is set to Plug-in Detection in the projector's Operation menu, and Auto Power On is set to Off in the projector's Network menu. Connection Guide Display: Set to On to automatically display the connection guide for the wireless transmitter (Epson Wireless Presentation) instead of the Home screen when there is no input signal when you turn on the projector ; not available in Content Playback mode |
| Reset Network Settings | — | Resets all settings on the Network menu to their default values |