| Fixed Installation
|
On
Off
|
Set to On if you
installed the projector in a fixed location |
| Test Pattern
|
— |
Displays a test pattern to assist in focusing and
zooming the image and correcting image shape |
| Setting Plate Installation
Guide
|
— |
Displays an on-screen guide to assist with installing
the projection screen when you have installed the projector on a
wall |
| Projection
|
Front
Front/Upside Down
Rear
Rear/Upside Down
|
Selects the way the projector faces the screen so the
image is oriented correctly |
| Geometry Correction
|
Quick Corner
Arc Correction
Point Correction
Correct Distortion Using
Smartphone
Fit to Screen Using
Smartphone
Memory
|
Adjusts image shape to rectangular (horizontally and
vertically)
Quick Corner: select
to correct image shape and alignment using an on-screen display
Arc Correction:
select to adjust the curve or arc of the horizontal and vertical
sides
Point Correction:
select to divide the projected image into a grid and correct
distortion by moving a selected point
Correct Distortion Using
Smartphone: corrects the distortion of projected images
using the Epson Setting Assistant app
Fit to Screen Using
Smartphone: corrects the shape and position of images to fit
on your screen using the Epson Setting Assistant app
Memory: controls
memory functions for current image shape settings
- Save Memory: saves
the current image shape as a memory setting
- Load Memory: loads
a saved image shape memory
- Rename Memory:
renames a saved image shape memory
- Erase Memory:
deletes a saved image shape memory
- Reset Memory:
resets all the image shape memory settings
|
| Geometry Correction
Wizard
|
— |
Guides you step-by-step through correcting the image
shape |
| Connect to Setting
Assistant
|
— |
Displays the QR code to connect to the Epson Setting
Assistant app |
| Digital Zoom
|
Varying levels available |
Adjusts the size of the projected image |
| Image Shift
|
Varying positions available |
Adjusts the position of the projected image (setting
does not appear if Digital Zoom
is at its widest setting) |
| Remote Receiver
|
Front/Rear
Front
Rear
Off
|
Limits reception of remote control signals by the
selected receiver; Off turns off
all receivers |
| Screen Type
|
4:3
16:6
16:9
16:10
21:9
|
Sets the aspect ratio to fit the image on the
projection surface. Setting is only displayed when Content Playback is set to Off in the projector's Operation menu. |
| Screen Position
|
Varying positions available |
Shifts the image position on the screen (only available
if the Screen Type setting is not
set to the same aspect ratio as the projector's native
resolution) |
| High Altitude Mode
|
On
Off
|
Regulates the projector's operating temperature at
altitudes above 4921 feet (1500 m) |
| Source
|
— |
Displays settings saved for each input source. To
change settings for an input source, make sure the source is
connected and select that source. |
| Blanking
|
Top
Bottom
Left
Right
|
Hides an area of the projected image that you select
using the arrow buttons. Setting is only displayed when
Content Playback is set to
Off in the projector's
Operation menu. |
| Reset to Defaults
|
— |
Resets all settings for current input source. Setting
is only displayed when Content
Playback is set to Off in
the projector's Operation
menu. |
| Settings for Video
Conference Rooms
|
— |
Changes multiple menu items at once for video
conference rooms. |
| Install Again
|
— |
Opens the wizard to adjust the projected image for
re-installing the projector. |
| Reset Installation
Settings
|
— |
Resets all settings on the Installation menu to their
default values except for the following:
|
