If you are unable to access the projector through a
web browser, make sure you are using the correct ID and password,
which are case sensitive.
Note: You
cannot change the user ID.
- For the user ID, enter EPSONWEB. For the password, enter the
password set in the projector's Network menu. No password is set by
default.
- Make sure you have access to the network the
projector is on.
- If you set the Standby
Mode setting to Communication
On in the projector's Operation menu, make sure the network
device is turned on. After turning on the network device, turn on
the projector.
- For the infrastructure mode, make sure you have
access to the network the projector is on.
- If your Web browser is set up to connect via a proxy
server, the Epson Web Control
screen cannot be displayed. Make settings for a connection without
using a proxy server.
Note: The
user ID and password are case sensitive.