Using WPS to Connect to a Network

If you have a WPS-enabled wireless router or access point, you can use Wi-Fi Protected Setup (WPS) to connect your product to the network.
Note: This feature requires the optional wireless LAN interface.
  1. Press the  home button, if necessary.
  2. Select the icon.
  3. Select Router. If you have already set up the product on a wired connection, a message appears. Select Change to Wi-Fi connection and skip to step 5.
  4. Select Start Setup or Change.
  5. Select Wi-Fi Setup. If you have already set up the product on a wired connection, a message appears. Select Yes.
  6. Select Push Button Setup (WPS).
  7. Follow the instructions on the LCD screen to complete WPS setup.
    Note: You must complete the on-screen instructions and select Start Setup within two minutes.
  8. Press the  home button to exit. You see the icon on the LCD screen and should be able to connect to your product directly from your computer or device, and then print. If you are printing from a computer, make sure you installed the network software from the Epson website.
    Note: If you don't see the icon, repeat these steps to try again.
Parent topic: Wi-Fi Protected Setup (WPS)
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use