If you have problems with paper ejecting properly, try
these solutions:
- If paper
does not eject fully, you may have set the wrong paper size. Cancel
printing to eject the paper. Select the correct paper size when you
reprint.
- If paper falls after printing from the paper tray,
place a box to make sure the paper does not touch the floor.
- If paper is
wrinkled when it ejects, it may be damp or too thin. Load new paper
and be sure to select the correct paper type setting when you
reprint.
- If paper is wrinkled when it ejects, you can also
try these solutions:
- Disable the Print Speed
Priority setting (Settings
> General Settings >
Printer Settings >
Print Speed Priority).
- Lower the print density.
- Change the paper type.
- Change the orientation of the paper between portrait
and landscape (this may affect the printing time).
- Make sure you correctly loaded the printable side of
the paper for your product.
- If you are using letterhead paper, select the
appropriate paper type setting.
- Clean the roller inside the printer to remove any
dust on the paper path.