Use the rear
manual feeder to load one cut sheet at a time from
8 × 10 inches (203 × 254 mm)
to
A2 (16.5 × 23.4 inches
[420 × 594 mm])/
17 × 22
inches (432 × 559 mm), 8 to 17 in. (203 to
432 mm) wide, 10 to 24 in. (154 to 610 mm) long, and 0.003 to 0.03
in. (0.08 to 0.8 mm) thick.
- Make sure the printer is turned
on.
- On the control panel, select
Menu > Paper Setting.
- Select Cut
Sheet and then select How
To....
- Follow
the on-screen instructions to load the paper and then select the
paper settings.
Note: Remove each
sheet as it is printed and ejected without letting the sheets stack
up on the output tray.