If you see wrinkles on your prints, try the following to solve
the problem:
- Dry the
paper after printing.
- Roll out the paper and stretch it.
- Lower the ink density in the Paper
Configuration dialog in the printer driver.
- Lower the resolution in the Level setting in the printer driver.
- Make sure you are operating the printer at normal room
temperature. The normal operating range for Epson special media is
59 to 77 °F (15 to 25?C), 40 to 60% humidity. For information about
other paper types, see the documentation supplied with the
paper.
- Make sure you selected the correct Media Type setting in the printer driver that
matches the paper loaded in the printer.
- If you are using non-Epson media, make sure you create a custom
paper configuration for the media.