If you have
a WPS-enabled wireless router that supports PIN mode, you can use
Wi-Fi Protected Setup (WPS) PIN mode to connect your product to the
network.
- Press the
home button, if necessary.
- Select the
Wi-Fi icon.
- Select Router.
- Select Start
Setup.
If the network connection is already set up, the connection
details are displayed. Tap Change to Wi-Fi
connection or Change Settings
to change the settings.
- Select Others.
- Select PIN
Code Setup(WPS).
- Follow
the instructions on the LCD screen to complete WPS setup.
Note: Make sure
you press Start Setup within two
minutes of activating WPS on your router.
The
Wi-Fi icon displayed on the LCD
screen indicates your wireless connection status. If the product is
not connected to the network, repeat these steps to try
again.