Notes on the Administrator Password

This product allows you to set an administrator password to prevent unauthorized third parties from accessing or changing the product settings or the network settings stored in the product when it is connected to a network.

If you set an administrator password, you need to enter the password when changing settings in configuration software such as Web Config.

The initial administrator password is set on the product, but you can change it to a password of your choice. The default value of the administrator password is printed on the product's label. The label is located on the side, the back, or the bottom, depending on the product. If there is no "PASSWORD" label attached, enter the serial number from the label attached to the back of the product for the default administrator password. (No user name is set as default.)

You must enter the administrator password when performing the following operations:

Accessing the advanced settings in Web Config
Updating your product's firmware from a computer or smart device
Using applications that can change the product's settings
Selecting a menu on the control panel that has been locked by an administrator
Changing or resetting the administrator password

You can change the administrator password from the product's control panel or Web Config. The new password must be 8 to 20 characters long and only contain single-byte alphanumeric characters and symbols.

You can restore the administrator password to the default setting from the product's control panel or Web Config. If you have forgotten the password and cannot restore it to the default settings, contact Epson for help.