Scanning Using Automatic Feeding Mode

In Automatic Feeding Mode, scanning starts automatically when originals are loaded into the ADF. This is useful when you want to scan originals one by one, or add originals to the current scanning process.

You can also use Automatic Feeding Mode when you are using Document Capture Pro.

1. Make sure you installed the product software and connected the product to your computer or network.
2. Start Epson Scan 2.
   Note: If you are using Document Capture Pro, you can open the Epson Scan 2 window by clicking the Detailed Settings button on the scan settings screen.
3. Select Automatic Feeding Mode on the Main Settings tab.
4. Select other scan settings in the Epson Scan 2 main window, as necessary.
5. Click Scan.
   Automatic Feeding Mode starts.

   Note: If you are using Document Capture Pro, click Save to save the scan settings. Automatic Feeding Mode will start when you start scanning.
6. Click Finish on the confirmation screen.
7. Place the original in the ADF and adjust the edge guides.
   Scanning starts automatically.

   Note: You can select Scanner Settings on the product's control panel to change the settings before scanning.
8. After scanning stops, place the next original in the ADF. Repeat this procedure until you have scanned all originals.