You can scan
an image and save it to a specified network folder or FTP server
using your product's control panel. You can either enter the folder
path directly on the product's control panel or select a folder
from the Contacts list. Make sure to configure a network folder or
FTP server before scanning. To check the destination before
scanning, select
Settings >
Scanner Settings, and enable the
Confirm Recipient setting.
Note: Make sure
that the Date/Time and Time Difference settings are correct.
- Place
your original on the product for scanning.
- Press the
home button, if necessary.
- Select Network
Folder/FTP.
- Do one of the following to enter a
folder location:
- To select frequently used addresses, tap the icons displayed on
the screen.
- To enter the folder path directly, select Keyboard > Communication Mode, and enter the folder path in
the Location (Required) field.
Select other options, as necessary.
- To select a contact from the Contacts list, select Contacts, select a contact, and then select
Close. You can search for a folder
from the Contacts list. Enter the search keyword into the box at
the top of the screen.
- Select the Scan Settings tab, and select the desired
settings.
- Tap the
Presets icon if you want to save
your settings as a preset.
Note:
Presets can be locked by an administrator. If you cannot access or
change this setting, contact your administrator for
assistance.
- Tap the
icon and check the product's
settings or make changes, if necessary.
- Select the
start icon to start
scanning.
Your product scans your original and saves it in the selected
location.