You can adjust the tint and brightness of multiple
projectors so they match better. You can also schedule automatic
adjustments to the tint and brightness.
If your projectors are on a network, the brightness
and tint for multiple projectors are corrected automatically based
on the darkest projector. The time required for automatic
adjustment depends on projector layout, and can take up to 18
minutes.
The auto adjustment feature is only available under
the following conditions:
- When you set the position of each image using the
Location Setup setting in the
Tiling menu
- When the Color
Calibration setting is enabled
- The optional lenses ELPLL08, ELPLX02S, or ELPLX02WS
are not installed
You can only undo or redo the screen matching
procedure if the Light Source
Mode setting is set to Custom.
Note:
Wait 20 minutes after turning on the projector
before using the Screen Matching feature and darken the room for
maximum accuracy. Brightness decreases over time, so you may
need to perform Screen Matching again to correct large differences
in brightness.