Stacking and Blending Using the Epson Projector Professional Tool Software

You can use the Geometry Assist - Stacking & Blending Function wizard to easily and quickly create a single large, bright, projected image by joining and overlapping the images of multiple projectors. See the online Epson Projector Professional Tool Operation Guidefor details.

Note: When the screen luminance is 40 lux or less, we recommend using projection sizes within the following ranges for each projector.

Up to 9.9 Klm: 50 to 200 inches
10 Klm to 14.9 Klm: 60 to 300 inches
15 Klm to 19.9 Klm: 70 to 350 inches
20 Klm to 24.9 Klm: 80 to 400 inches
25 Klm to 29.9 Klm: 90 to 450 inches
30 Klm: 100 to 500 inches

Start the Epson Projector Professional Tool software.
Create a group of projectors that support Stacking & Blending on theLayout/Monitoring tab
Select Blending and Stacking Settings on the Create Group screen.
Specify each projector's position using Blending and Stacking Settings.
Start the Geometry Assist - Stacking & Blending Function wizard.

When the wizard has finished, perform the following operations as necessary:

Screen Matching to correct the tint and brightness of each projected image.
Point Correction to adjust the gaps in the positions of the projected image.

Note: We recommend displaying the following test patterns: Gray Bars V, Gray Bars H, and White