- Extended > Multi-Projection > Edge Blending
You can blend the border between multiple images to
create a seamless screen.
- Edge Blending
- Set to Blending/Black
Level or Black Level to
enable the Edge Blending feature.
Select Black Level
when you do not need to use the projector's Geometry Correction feature, such as when
adjusting the blending area using another device such as a media
server. When Black Level is set,
Line Guide,Pattern Guide, and Guide Color are not available.
When not projecting images from multiple projectors,
select Off.
When Edge Blending is set to
Black Level or Off, Blend Start
Position/Blend Range/Blend
Curve from Top Edge/Bottom
Edge/Left Edge/RightEdge are not available.
- Top Edge/Bottom
Edge/Left Edge/Right Edge
- Select the edge you want to blend on each
projector.
- Blending to turn
on the Edge Blending feature for
the selected edge. Gradation is applied to the blending range.
- Blend Start
Position to adjust the point where edge blending begins in
1-pixel increments. The blending start position is displayed with a
red line.
- Blend Range to
select the width of the blended area in 1-pixel increments. You can
select up to 70% of the projector's resolution.
- Blend Curve to
select a gradient for the shaded area on the projected image.
- Line Guide
- Set to On to
display a guide on the blended area.
- Pattern Guide
- Set to On to
display a grid to match the blended area.
- Guide Color
- Select a combination of guide colors.
Note:
- Blend Start
Position, Blend Range,
Blend Curve, Line Guide, Pattern Guide, and Guide Color are only available when
Edge Blending is set to
Blending/Black Level.
- Set the Color Mode
setting to Multi-Projection in
the projector's Image menu for
all of the projectors.
- When you adjust the blending area using another
device such as a media server, select Black Level.