You can select the communication settings for
connections to an HDBaseT transmitter or switcher.
- Control Communications
- You can enable or disable communication from the
Ethernet and serial ports on the HDBaseT transmitter or switcher;
set to On to disable the
projector's LAN, RS-232C, and Remote ports. To use control
communication even if the projector is in standby mode, select
Always On as the A/V Output setting in the projector's
Extended menu.
- Extended >
A/V Settings > A/V Output
- Extron XTP
- Set to On when you
connect an Extron XTP transmitter or switcher to the HDBaseT ports. Visit the Extron web site for
more details on the XTP system.
Note:
- Control
Communications is only displayed when Extron XTP is set to Off.
- When Extron XTP is
set to On, the cooling fans may
run even in standby status. This is not a malfunction.
- When A/V Settings
is set to Always On, and
Control Communications is set to
On, communication from the
HDBaseT port is enabled even if
the projector is in standby mode.