Simple Stacking

You can easily create a bright projected image by overlapping the images of two projectors connected by wired LAN.

Point Correction: Adjust the image shape of the primary projector. Select Quick Corner to correct it roughly, and then select Point Correction to correct it in detail.
Start Auto Adjustment: You can automatically adjust the projected image using the external camera.
The projector on which you perform this feature becomes the primary projector, and the images from other projectors are overlapped based on the primary projector's image.

Note:

Connect two projectors directly using a LAN cable.
Make sure you do the following before adjusting:
- Set the DHCP setting to On in the projector's Network menu for two projectors.
  Network > Network Configuration > Wired LAN > IP Settings
- Adjust the image position, shape, and focus on the primary projector. If you adjust the image shape of the primary projector,use the Point Correction menu in the Simple Stacking setting.
- The required time for simple stacking varies depending on the projector layout. It takes up to approximately four minutes.
- After completing the simple stacking process, Display Background is automatically set to Black.
  Extended > Display > Display Background
This function is not available when you use the following optional lenses: ELPLX02S, ELPLX02WS, or ELPLL08.