You can view the projector's information.
- Operation Hours
- Displays the number of hours the projector has been
used since it was turned on. The cumulative use time is displayed
as "0H" for the first 10 hours. When exceeding 10 hours, it is
displayed as "10H" and "11H" in 1 hour units.
- Source
- Displays the name of the port to which the current
input source is connected.
- Input Signal
- Displays the input signal setting of the current
input source.
- Resolution
- Displays the resolution of the current input
source.
- Refresh Rate
- Displays the refresh rate of the current input
source.
- Sync Info
- Displays information about video signals that may be
needed by a service technician.
- Color Format
- Displays the color format of the current input
source.
- Status
- Displays information about projector problems that
may be needed by a service technician.
- Serial Number
- Displays the projector's serial number.
- Lens Type
- Displays the model number of the installed
lens.
- Event ID
- Displays the Event ID number corresponding to a
network problem; follow the link below to see the list of Event ID
codes.
- HDBaseT Signal Level
- Displays the signal level of the HDBaseT
transmitter; if the information is displayed in yellow, the signal
level is weak.