Laser Safety Information

Complies with FDA performance standards for laser products except for conformance as a Risk Group 2 LIP as defined in IEC 62471-5: Ed. 1.0. For more information see Laser Notice No. 57, dated May 8, 2019.

This projector is a Class 1 laser product that complies with the IEC60825-1:2014 and EN60825-1:2014 + A11:2021 international standards for lasers. Follow these safety instructions when using the projector.
Warning:
  • Do not open the projector's case. The projector contains a high-powered laser.
  • Possibly hazardous optical radiation emitted from this product. Do not look at operating light source. Eye injury may result.
  • As with any bright source, do not stare into the beam, RG2 IEC/EN 62471-5:2015.
  • This projector may become RG3 when interchangeable lenses ELPLM11 or ELPLL08 are installed. Refer to the lens list and hazard distance before operation. Such combinations of projector and lens are intended for professional use only, and are not intended for consumer use. When installing this projector, always commission a professional installer and ensure the safety of the surrounding area.
  • Operators shall control access to the beam within the hazard distance or install the product at a height that will prevent eye exposure within the hazard distance.
  • No direct exposure to the beam shall be permitted.
Caution:
Do not disassemble the projector when disposing of it. Dispose according to your local or national laws and regulations.
Note: See the link below for additional safety laser cautions and other general safety instructions.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use