If only a partial computer image appears, try the
following solutions:
- Make sure you selected the correct Screen Type setting in the projector's
Extended menu for the screen you are using. If there are margins
between the edge of the image and the projected screen frame, use
the Screen Position setting to
adjust the position of the image.
- Make sure the Scale setting in the Signal menu is turned
off.
- Make sure the Resolution setting in the Signal menu is set
correctly for the input signal.
- Try adjusting the image position using the
Position setting in the Signal
menu.
- Check the Blanking
setting in the Signal menu.
- Check your
computer display settings to disable dual display and set the
resolution within the projector's limits. (See your computer manual
for details.)
- Check the
resolution assigned to your presentation files to see if they are
created for a different resolution than you are projecting in. (See
your software help for details.)
- If you are projecting in Content Playback mode, make sure you are
using the correct Overlay Effect
setting in the Settings menu.