- Extended > Multi-Projection > Group Tiling > Tiling
You can project the same image from up to 15
projectors to create one large image using the Tiling feature.
- Tiling
- When the optional external camera is installed, set
to Auto to configure tiling
automatically. If you do not install the optional external camera
or tiling the images automatically was unsuccessful, select
Manual, and then select the
Layout and Location Setup settings individually.
- Layout
- Select the number of rows and columns you are
setting up.
- Location Setup
- Select the position of each projected image as
follows:
- Row Order to
layout the screens from top to bottom, starting with 1 at the top,
in sequential order.
- Column Order to
layout the screens from left to right, starting with A on the left,
in alphabetical order
- Location Info
- You can view the name, IP address, and ID of the
projector you set.
Note:
- Make sure nothing is blocking the optional external
camera while performing automatic tiling.
- Do not change any of the projector names or IP
addresses, or the images will not be adjusted automatically.
- The auto tiling function is not available when you
use the following optional lenses: ELPLX02S, ELPLX02WS, and
ELPLL08.