You can save customized settings and then select the
saved settings whenever you want to use them.
- Memory
- You can save the following settings. You can
register up to 10 memories with different names.
- Image menu
settings
- Scale in the
Signal menu
- Light Source Mode
and Brightness Level in the
Settings menu
- Edge Blending,
Color Matching, and Black Level in the Extended menu
- Lens Position
- You can save the position of the lens adjusted using
lens shift, zoom, focus, and distortion. You can register up to 10
memories with different names.
- Geometry Correction
- You can save the adjustment value of the geometry
correction. You can register up to 3 memories with different
names.
You can use the following options for each memory
type:
- Load Memory
- You can load the saved memory. The settings applied
to the current image are replaced with the settings in the
memory.
- Save Memory
- You can save your current settings to memory.
- Erase Memory
- You can erase the selected memory settings.
- Rename Memory
- You can rename a saved memory.
- Reset Memory Settings
- You can delete all saved memories.
Note:
- A memory name that has already been used is
indicated by a blue mark
- Saving over a previously saved memory overwrites the
settings with your current settings.
- The lens position when a memory is loaded may not
completely match the lens position when the memory was saved. If
there is a large discrepancy between the lens position, calibrate
the lens.
- You can also open the Memory screen using the
Memory button on the remote
control.