- Signal
> HDMI1 Backup Source Setting
If a problem occurs in which the video signal is
interrupted while projecting images from the HDMI1 input source,
you can set a backup source to automatically switch the input
source.
- Backup Source
- Select one of the following backup sources:
- Status
- Displays whether or not it is currently possible to
switch to the selected backup source..
Note:
- Input the same signal to the HDMI1 In port and the backup source in
advance, and then check the Status to see whether or not you can
switch the input source.
- If the input source is switched to the backup
source, the current input source information is not reflected in
Status Information in the
projector's Info menu until the
input source is switched next time
- The backup source must have the same signals as the
HDMI1 In source for the following
items.
- Resolution
- Frequency
- Color Depth
- Color Space
- After switching to the backup source, the Image menu
settings for the HDMI1 In source
are applied to the image of the backup source.