- Press the Menu button.
- Select the Network menu
and press
Enter. - Select Network
Configuration and press Enter.
- Select the Others menu
and press Enter.
- If you want to select the authentication method for command communication, select Command Communication. Select Protected to perform Digest Authentication using the Web Control Password setting. Select Compatible to perform plain text authentication using the Monitor Password.
- If you want to use the Secure HTTP protocol to encrypt communication when using Web Control, turn on the Secure HTTP setting and import the web server certificate using the Web Server Cert. setting.
- If you want to operate the projector using Web API, turn on the Web API setting. The username for API authentication is EPSONWEB; use the password that is set for the Web Control Password.
- Select the Priority Gateway setting for your network.
- If your network environment uses an AMX controller, turn on the AMX Device Discovery setting to allow the projector to be detected.
- If your network
environment uses a Crestron Connected controller, turn on the
Crestron Connected setting to
allow the projector to be detected.
Note: Enabling Crestron Connected disables the Message Broadcasting feature in the Epson Projector Management software (Windows only).
- If your network environment uses Crestron Xio Cloud, turn on the Crestron Xio Cloud setting.
- If you want to control the projector using Art-Net (an Ethernet communication protocol based on TCP/IP), turn on the Art-Net setting.
- If you want to control the projector using sACN, turn on the sACN setting and make the necessary settings.
- If you want this projector to receive broadcast messages over the network, turn on the Message Broadcasting setting. Administrators can broadcast messages over the network using the Epson Projector Management software (Windows only).
- When you finish selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus.